Project Category: Processing

Inline metal detector(CCP), final check, food-grade packing, COA. Finished product passes through inline metal detection (CCP) with validated sensitivities per specification; hourly challenge tests are documented. Any reject isolates the affected lot segment for investigation and rework. Conforming units proceed to…

Grafter machinesets sieve profile; grinding machineto TBC/powder. Pre-screened product enters the calibration line, where classifier screens and the grafter unit set the specified mesh distribution. Metered feed then passes through the grinder to produce TBC or powder. We control screen aperture,…

Ejects defects and discoloration with Color Separator Pre-calibrated material enters the size-calibration train: classifier screens/grafter set mesh distribution to target bands, then feed-controlled grinding produces TBC or powder. Mill parameters—screen aperture, rotor speed, gap, feed rate—are tuned to achieve particle-size distribution…

Screening machine+ slender machineremove stems/oversize. Material is fed to vibratory screening for scalping and fines removal, using calibrated mesh sets matched to the product’s specified sieve profile. Oversize streams enter the slender/de-stemming unit to strip stems and woody fragments; rejects are…

Hygienic wash; dry to target moisture for stability. Product is dewatered (vibration/centrifuge), screened for foreign matter, and transferred to HEPA-filtered, temperature-and RH-controlled air tunnels or tray dryers. Airflow, residence time, and bed depth are calibrated to protect color/aroma while reaching target…

Sampling, moisture check, foreign-matter pre-clean; lot ID and traceability. Upon arrival, lots are seal-verified, identified, and quarantined. We record supplier docs, temperature/humidity, and cross-contamination risks (allergens/organic). Sampling follows ISO 948 composite plans; tests cover moisture (LOD), bulk density, sieve profile, volatile…